Installation Guide of LED Ceiling Light

Energy-saving LED ceiling light will always be a good choice for you when you don't know how to buy and where to buy LED lights. Traditional lights like incandescent lamp, fluorescent lamp and halogen tungsten lamp all use electronic field radiation to emit light. It can withstand the high strength mechanical shock and vibration. Also, it is invulnerability to break and has the average life expectancy of 3-50000 hours. LED lamp manufacturer is so amazing, are you interested in where to buy LED lights? Before telling where to buy LED lights, I'd like to introduce LED ceiling light to you. LED ceiling light is a kind of energy-saving light.

LED ceiling light has the same advantages as other LED lights such as long lifespan and environmental friendly. However, the most important is energy-saving. Energy-saving wholesale LED industrial light is very popular among consumers. After purchasing a LED ceiling light, you need to install it correctly. Here are the steps of installation:
1. Due to the different ceiling, days Shed (such as ordinary wood, solid wood, lime plaster board, cement lime coatings, synthetic papaya ceiling, etc.) the forces, so in some cases require the use of screws lamps.
2. As lighting is heavy,when installed, please notify the relevant engineering personnel according to the hardness of the forces smallpox procured expansion screws bolt or screw lengthened reinforcement. The installation should corresponding force screws.
4. Install LED Ceiling inspection.
5. Confirm LED lamp manufacturer operating voltage before powering the lamp. Make sure the lamp operating voltage is correct. Misconnection voltage can cause permanent damage to the cheap LED flood light.
6. Installing LED ceiling light should be avoided in the heat and hot steam and corrosive gases so as not to affect life expectancy.
7. Never forget cut off the power before installation. Turn off the switch, while also prevent electrical shock before installing. Check the installation size to meet the requirements and check the terminals and the power input cable to make sure they are connected.
8. The product uses high voltage (110V / 220V) power light cup.
9. Place mall mounting holes on the ceiling in the required size in advance a good start, the power line connected to the terminal fixtures, pay attention to positive and negative. That is all for energy-saving LED ceiling light installation. About where to buy LED lights, the ledlampcheap.com will help you. 

Posted March 2, 2016 20:35